Implementing Valid Alternate Interface
Hi,
we have a development based on the XK-AUDIO-216-MC-AB reference design with 16 I/O, for 192kHz operation we need to choose an alternate interface that limits the I/O to 10, and manually selecting this works fine, but it is an extra step that is required when changing sample rates.
Following a conversation with one of the engineers from Apple's core audio team I believe that this process can be automated by implementing the Valid Alternate Settings Control as described in the USB class definition for audio devices 5.2.6.1.2, and I see equivalent comments in the TheSycon's Windows driver change list.
This project is based on the XK-AUDIO-216-MC-AB reference software using xTIMEcomposer 14.4.1 with no changes to endpoint0.c or usb_device.xc
Has anyone implemented this feature and can advise?
Thanks!
Implementing Valid Alternate Interface
-
- Newbie
- Posts: 1
- Joined: Wed Mar 08, 2023 6:45 pm
-
- XCore Expert
- Posts: 947
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
Yes, the XMOS design does support this to some extent - see the ADAT support (ADAT essentially changes channel count based on sample rate - see SMUX spec).
You would need some mods to make this work in the general case, I do no think this should be a large project.
You would need some mods to make this work in the general case, I do no think this should be a large project.