How much mili amp can be sinked & sourced by L1, L2, & G4 chip?
Where the relevant document may be found?
jags
Port sourcing & sinking capacity
-
- Experienced Member
- Posts: 117
- Joined: Tue Oct 18, 2011 3:28 pm
-
- XCore Expert
- Posts: 754
- Joined: Thu Dec 10, 2009 6:56 pm
Look in the datasheets :-)
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
Its rather small for the Lx series (from memory) 4ma or 8ma depending on which pin, full details in datasheet as Bianco mentions.
regards
Al
regards
Al
-
- Experienced Member
- Posts: 117
- Joined: Tue Oct 18, 2011 3:28 pm
In L1 data sheet I have found that Ports 1A, 1C, 1D, 1H, 1I, 1J, 1K and 1L are nominal 8mA drivers, the remainder of the general-purpose I/Os are 4 mA. It is true for all Lx & G4 controller?
it is really very small rather than PIC (20ma).
jags
it is really very small rather than PIC (20ma).
jags
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
Yes the Lx series have puny output characteristics, they are also not 5v tolerant unlike the Gx series which are different again.
regards
Al
regards
Al