That old code might be for G devices; L devices have a slightly different
link protocol. Nothing terribly hard, just warning you :-)
boot l1 device via link by a different cpu
-
- XCore Expert
- Posts: 844
- Joined: Sun Jul 11, 2010 1:31 am
-
- Member
- Posts: 8
- Joined: Mon Nov 08, 2010 8:31 pm
yes cortex M3 is great, i'm basing a few different projects on the LP1766, but for this project it will be the AT91SAM7X (arm7) for reasons i (sorry) can't reveal.
-
- Active Member
- Posts: 55
- Joined: Fri Oct 15, 2010 12:14 am
Hi Seger,
Thanks for the information.
I will be developing using a G4 on the XC-1A so hopefully the protocols implemented in the old code will still get me going.
Regards, Roger...
Thanks for the information.
I will be developing using a G4 on the XC-1A so hopefully the protocols implemented in the old code will still get me going.
Regards, Roger...
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
I would love to see open versions of this code for both G4 and L1, will you both be creating a project for this to share the code?
regards
Al
regards
Al
-
- Member
- Posts: 8
- Joined: Mon Nov 08, 2010 8:31 pm
yes, once i work on it, i'll probably post the link code. but this might take some time.