Hi guys,
SomeOne Knows how many Watts an XS1-L1 64 pins disipates.
I need this to design my board. I want to use 2 XS1-L1's on both side of my board.
Kind regards,
Jo
thermal pad XS1-L1 64 pins
-
- Member++
- Posts: 20
- Joined: Thu Mar 04, 2010 7:27 pm
-
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
Probably not the most confused programmer anymore on the XCORE forum.
-
- Member++
- Posts: 20
- Joined: Thu Mar 04, 2010 7:27 pm
Tnx lilltroll... It's ok for the terminal pads to attached to GND?
-
- XCore Addict
- Posts: 165
- Joined: Wed Feb 10, 2010 2:32 pm
The big pad in centre of the chip (as opposed to the pins around the edge of the chip) MUST be connected to ground. It is the only digital ground connection (check the datasheet for 'PADDLE').
In addition to making the ground connection it does offer a low thermal resistance path to a ground plane. The L1 runs pretty cool though.
Does this answer your question?
In addition to making the ground connection it does offer a low thermal resistance path to a ground plane. The L1 runs pretty cool though.
Does this answer your question?