Audio USB in light of S1-L Hardware Design Checklist
-
- Respected Member
- Posts: 283
- Joined: Fri Mar 19, 2010 4:49 am
-
- Respected Member
- Posts: 283
- Joined: Fri Mar 19, 2010 4:49 am
Have a question on the USB ULPI port table as attached above. Pin XnD36 in shown as a green pin (can be used). This signal is also P1M0 / P8D0 / P16B8.
This signal is the only shared pin that is shown as green. It is also the first bit of the 8 bit port P8D.
Wanted to double check if XnD36 is a green pin?
This signal is the only shared pin that is shown as green. It is also the first bit of the 8 bit port P8D.
Wanted to double check if XnD36 is a green pin?
-
- XCore Addict
- Posts: 165
- Joined: Wed Feb 10, 2010 2:32 pm
Yes, XnD36 is and should be Green. Basically this means that you can use P1M0 when you are using ULPI.bearcat wrote:Have a question on the USB ULPI port table as attached above. Pin XnD36 in shown as a green pin (can be used). This signal is also P1M0 / P8D0 / P16B8.
This signal is the only shared pin that is shown as green. It is also the first bit of the 8 bit port P8D.
Wanted to double check if XnD36 is a green pin?