I am new here and I apologize for my ignorance. Doing some searching has not turned up what I think I need. What I would like to do is take 8 channels of I2S from an HDMI transceiver (Analog Devices ADV7623) and output to 1-4 SPDIF links. Ideally I'd like to easily (ie not reprogramming) configure the outputs as one 8-Channel ADAT link at 48Khz, two 4-Channel ADAT links at 128Khz; or four 2-channel ADAT links at 192Khz.
Any pointers would be greatly appreciated as well as suitable chip selection advice.
Michael
2/4/8-Channel I2S to ADAT TX
-
- New User
- Posts: 2
- Joined: Mon Sep 14, 2015 9:40 pm
-
- New User
- Posts: 2
- Joined: Mon Sep 14, 2015 9:40 pm
Ok, I am a dummy. Found the spec for the ADAT transmitter which already does what I need!
Sorry for the noise!
But, if anyone has experience and can offer advice on this, I would greatly appreciate it!
Michael
Sorry for the noise!
But, if anyone has experience and can offer advice on this, I would greatly appreciate it!
Michael