dev board barrel jack size?
-
- Member
- Posts: 10
- Joined: Fri Dec 18, 2009 8:05 am
dev board barrel jack size?
I'm looking to buy a external power supply for my XC-1A. I cant seem to find any info on the barrel jack size.
-
- XCore Addict
- Posts: 169
- Joined: Fri Jan 08, 2010 12:13 am
The specs are 5V centre positive - 1.35mm pin, 3.9 is the outer diameter of the hole.
This is the standard on a lot of our kits now...
Hope that helps!
This is the standard on a lot of our kits now...
Hope that helps!
Paul
On two occasions I have been asked, 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question.
On two occasions I have been asked, 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question.
-
- Member
- Posts: 10
- Joined: Fri Dec 18, 2009 8:05 am
Hummm... I cannot seem to find one from DK. The closest they have is a 6V, 1.3mm I.D. x 3.5mm O.D. x 9.5mm.
http://search.digikey.com/scripts/dksea ... 978-P7P-ND
Where can I get a proper one?
http://search.digikey.com/scripts/dksea ... 978-P7P-ND
Where can I get a proper one?
-
- XCore Expert
- Posts: 546
- Joined: Thu Dec 10, 2009 10:41 pm
- Location: St. Leonards-on-Sea, E. Sussex, UK.
The one I got with an XC-2 is made by Phihong, and is model PSA05R-050. The connector OD is 3.5mm (I measured it).
It came in a box with the RS order code 234-216:
http://uk.rs-online.com/web/search/sear ... 16&x=0&y=0
It came in a box with the RS order code 234-216:
http://uk.rs-online.com/web/search/sear ... 16&x=0&y=0
-
- Member
- Posts: 10
- Joined: Fri Dec 18, 2009 8:05 am
Looks like Jameco has some for us in the states.
http://www.jameco.com/webapp/wcs/stores ... SF&CID=GMC
thanks guys!
http://www.jameco.com/webapp/wcs/stores ... SF&CID=GMC
thanks guys!
-
- Member
- Posts: 10
- Joined: Fri Dec 18, 2009 8:05 am
Ended up buying a power supply from DK and replacing the plug. It works fine.
PS: T1038-P5RP-ND
plug: CP3-1003-ND
PS: T1038-P5RP-ND
plug: CP3-1003-ND