DJKit demos - 1ioxs won't do USB Audio 2.0
-
bowerymarc
- Active Member
- Posts: 40
- Joined: Mon Dec 30, 2013 7:29 am
DJKit demos - 1ioxs won't do USB Audio 2.0
This is odd... both in 6.0.1 and 6.5.1 if I select the 1ioxs build target in app_usb_aud_skc_su1 it always shows up as Audio 1.0, with 48KHz max sample rate (in osx Audio-Midi), whereas with 2ioxs it runs as Audio 2.0 with 192KHz max sample rate.Same thing in app_usb_aud_su1. What's going on?
-
infiniteimprobability
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
1ioxs is set to support USB Audio Class 1.0 only (with SPDIF but no MIDI) - hence you will only see sample rates supported by FS USB and UAC1.
From user guide:
Build Option Name
Audio Class Version - 1 or 2
Audio Input - on or off
Audio Output - on or off
MIDI - on or off
S/PDIF Output - on or off
"For example a binary named 2ioxs would indicate Audio Class 2.0 with input and output enabled, MIDI disabled, SPDIF output enabled. "
From user guide:
Build Option Name
Audio Class Version - 1 or 2
Audio Input - on or off
Audio Output - on or off
MIDI - on or off
S/PDIF Output - on or off
"For example a binary named 2ioxs would indicate Audio Class 2.0 with input and output enabled, MIDI disabled, SPDIF output enabled. "