xCore-200 MC dev board - failed to connect to SQI flash device with sample code
Posted: Tue Oct 15, 2019 11:26 am
Hi,
Hopefully a straight forward solution. There appears to be mismatched quad serial flash settings. I have made no adjustments, downloaded the last IDE, latest demo code, new untouched development board. I had hoped they would of all just work seamlessly..
I can debug and run the application however on flashing the board I get the following error:
Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI ports are defined within your xn file.
Hardware and software:
xTIMEcomposer/Community_14.3.3 on Ubuntu 16.04
sw_usb_audio-[sw]_6.15.2.zip
app_usb_aud_xk_216_mc ( app within above zip )
xCORE-200 MC AUDIO 2V0
On board is IS25LQ016 ( the circuit states a IS25LQ008 and the software is xn has S25FL116K )
xflash -l returns:
ID Name Adapter ID Devices
-- ---- ---------- -------
0 XMOS XTAG-3 NN2WUEuW O[0]
After reading many posts on here it seems a mismatch in SQI settings, my question is "exactly" where and how do I change these settings? I've tried "IS25LQ016" and "IS25LQ016B" in my xk-audio-216-mc.xn but neither made any difference. We have a design pending on this development board so any help would be appreciated.
Attached is the error log when trying to program the development board.
Thanks.
Hopefully a straight forward solution. There appears to be mismatched quad serial flash settings. I have made no adjustments, downloaded the last IDE, latest demo code, new untouched development board. I had hoped they would of all just work seamlessly..
I can debug and run the application however on flashing the board I get the following error:
Error on tile[0]: failed to connect to flash device. Please verify that SQI type is supported and that the correct SQI ports are defined within your xn file.
Hardware and software:
xTIMEcomposer/Community_14.3.3 on Ubuntu 16.04
sw_usb_audio-[sw]_6.15.2.zip
app_usb_aud_xk_216_mc ( app within above zip )
xCORE-200 MC AUDIO 2V0
On board is IS25LQ016 ( the circuit states a IS25LQ008 and the software is xn has S25FL116K )
xflash -l returns:
ID Name Adapter ID Devices
-- ---- ---------- -------
0 XMOS XTAG-3 NN2WUEuW O[0]
After reading many posts on here it seems a mismatch in SQI settings, my question is "exactly" where and how do I change these settings? I've tried "IS25LQ016" and "IS25LQ016B" in my xk-audio-216-mc.xn but neither made any difference. We have a design pending on this development board so any help would be appreciated.
Attached is the error log when trying to program the development board.
Thanks.