Page 3 of 3
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Wed May 09, 2018 8:13 am
by xlordofpainx
48 is coming from the spdif into the XMOS and 182360( or some similar gibberish) comes out of XMOS
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Wed May 09, 2018 9:07 am
by xlordofpainx
I used the program that you sent me. I changed the .xn file to xk-audio-216, i changed the ports, and i replaced the codec that you had used with cs4384_5368. But the console prints out when building:
09:58:47 **** Incremental Build of configuration Default for project AN00231_ASRC_SPDIF_TO_DAC ****
xmake CONFIG=Default all
Checking build modules
Using build modules: lib_gpio(1.1.0) lib_i2c(4.0.0) lib_i2s(2.3.0) lib_logging(2.1.1) lib_spdif(2.0.2) lib_src(1.1.1) lib_xassert(3.0.1)
xmake: *** [bin//AN00231_ASRC_SPDIF_TO_DAC.xe] Error 2
09:58:54 Build Finished (took 6s.943ms)
Doesn't exactly say what the bug is...
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Thu May 10, 2018 9:53 am
by ffomich
Try to clean project before build or manually delete .build & bin folders.
I use xTIMEcomposer 14.2.4
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Tue Mar 05, 2019 10:29 am
by Ivanshi
I can't get 192kHz data with AN00231. Can you solve this problem? Or can you refer me to the program from ffomich? My email address is
604797603@qq.com
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Tue Mar 05, 2019 2:07 pm
by mon2
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Wed Mar 06, 2019 9:08 am
by Ivanshi
I know the app note was not designed to run at 192KHz，but this is what I want to do now.
I tried to modify the program, but it couldn't be implemented, so I hope to get help.
Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz
Posted: Thu Mar 07, 2019 2:36 pm
by akp
Good luck. Report on your progress.