XCore Exchange

Posted: **Thu Mar 05, 2020 1:26 pm**

Hi guys!
Is there any examples like the above for XCORE 200 Explorer kit. Particularly ADC and PID controller.
I know there is one for ADC "interfacing ADCs with xcore" but would appreciate if i can use PID or PI in the control loop .
is there way to move forward in doing this on Xcore explorer kit ?
Thank you

Posted: **Thu Mar 12, 2020 1:39 pm**

Hi. See if the attached helps.

AN01021_-Interfacing-High-Speed-ADCs-with-xCORE_1.0.2rc1.pdf

lib_startkit_support-[userguide]_3.0.1rc1.pdf

Review the StartKit supplied examples and change the port pins relevant to the new Explorer Kit to run on the new target. That is, start with a blank template on the IDE -> target the Explorer Kit (XMOS tools will auto-fill in the Explorer Kit specifics -> then open up / import any of the StartKit examples -> cut & paste the source code from the StartKit but into your Explorer Kit project -> change the ports to suit and compile and test.

https://www.xmos.com/file/an01021-inter ... with-xcore

https://www.xcore.com/viewtopic.php?t=524&start=20

https://www.element14.com/community/com ... obot-xmp-2

XCore Exchange

How to use the ADC on StartKit?

Re: How to use the ADC on StartKit?

Re: How to use the ADC on StartKit?