Won a XDK XS1-G Development Kit, but don't need it

Off topic discussions that do not fit into any of the above can go here. Please keep it clean and respectful.
User avatar
paul
XCore Addict
Posts: 169
Joined: Fri Jan 08, 2010 12:13 am
Contact:

Post by paul »

jonathan wrote: If not, there are presumably old versions of the tools still available for download that do?
There is a tools archive here - https://www.xmos.com/products/archives


Paul

On two occasions I have been asked, 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question.
User avatar
infiniteimprobability
XCore Legend
Posts: 1126
Joined: Thu May 27, 2010 10:08 am
Contact:

Post by infiniteimprobability »

I thought the tools still supported all versions of released silicon?
"Rev A" G4 support got removed at version 9.9.0 (we only shipped rev A via some v2.1 XDKs). All other kits and XDKs post v2.1 will all be Rev B.

The serial number off the back of the XDK or the chip markings will tell all!
kruedi2
Member
Posts: 11
Joined: Fri Jun 25, 2010 3:05 pm

Post by kruedi2 »

The (hard to read) marking is:
XS1-G4000A
BGA 51208Eng
0832

Trash or worth a penny ?

Kind regards

Dietmar
Heater
Respected Member
Posts: 296
Joined: Thu Dec 10, 2009 10:33 pm

Post by Heater »

What did I say? A rare collectors item.

If it's trash I'll pay you to post it to me in Helsinki :)
Corin
Experienced Member
Posts: 66
Joined: Fri Dec 11, 2009 3:38 pm

Post by Corin »

That is rev A silicon and only supported by the pre 9.9.0 tools unfortunately.

Regards,
Corn
User avatar
leon_heller
XCore Expert
Posts: 546
Joined: Thu Dec 10, 2009 10:41 pm
Location: St. Leonards-on-Sea, E. Sussex, UK.
Contact:

Post by leon_heller »

It could be updated with a newer chip. It would probably cost about £50 to get the chip removed and replaced.
m_y
Experienced Member
Posts: 69
Joined: Mon May 17, 2010 10:19 am

Post by m_y »

leon_heller wrote:It could be updated with a newer chip. It would probably cost about £50 to get the chip removed and replaced.
I believe XMOS did a no-cost replacement of RevA silicon with RevB equivalents although clearly at least one was missed. If I were you, I would enquire at XMOS about getting this one swapped for a current model.
kruedi2
Member
Posts: 11
Joined: Fri Jun 25, 2010 3:05 pm

Post by kruedi2 »

Is there any other (trade) offer except postage payment ?
Nothing at home or in your company (giveaways etc.) you won't need anymore ?

Kind regards

Dietmar
Heater
Respected Member
Posts: 296
Joined: Thu Dec 10, 2009 10:33 pm

Post by Heater »

kruedi2:

Sadly not.

The small software start up company I'm working for has very little in the way of interesting hardware gadgets I could scrounge.

My personal circumstance at this moment is such that I have nothing to offer except my time and some up and comming software projects that I will throw into the open source pot.

These currently include:
a) A means of running large C/C++ and FORTRAN programs on an XMOS chip from an attached external RAM. Using a virtual machine.
b) A 6809 microprocessor emulator.
c) Asm code for the Parallax Inc Propeller micro-controller that speaks XLINK protocol to XMOS chips.

Hmm... I really should get on with posting those projects here...
User avatar
Berni
Respected Member
Posts: 363
Joined: Thu Dec 10, 2009 10:17 pm
Contact:

Post by Berni »

Now thats a impressive list of projects you got there! Hows your progress on those?
Post Reply