Hi,
I use XU216, the audio clock uses 45.1584 /49.152Mhz, but the SPDIF output becomes 88.2K-384K, 44.1/48K output cannot be achieved.
Tried to modify SpdifTransmit.xc, but failed.
Please help.
thanks
Use 45/49Mhz to achieve correct SPDIF outputHi, I use XU216, the audio clock uses 45.1584 /49.152Mhz, but the SPDIF out
Yes you need write SpdifTransmit_8 or change divide clock for 44/48
I write change divide clock, that mean set on input pin MCLK divider 2 , i mean xcore200 can do this. Only when 44/48 and , then you have MCLK 22/24
that need be changed in code...
that need be changed in code...