See attached.
- xcore_kit_links_review.zip
- (369.15 KiB) Downloaded 141 times
xcore_kit_links_review.zip- (369.15 KiB) Downloaded 141 times
trying xconnect by two startkit , modifying xn file
On the Link E = Link4 relationship question, you will have to compare the schematic for the XCORE-200 Explorer Kit (where the pins are referenced as Link E) against the CPU datasheet where the same pins are referenced as Link 4. That is, same port pins are known as Link E in the kit and Link 4 in the datasheet.
See attached.
See attached.
Thank you mon2
I think the problem that seperating flash file to two image files and downloading on the board will take too much time.
So I'm gonna move to next stage booting from link.
but customboard has not enough pin because it was made for network not using link.
so I'm considering making the pcb or connect 200 board with startkit.
and your xn files you uploaded before has same problem with me.
my error message was meaning this
first error(solved) then second error occur
solved second error then third error occur again...until 5th error
meaning I solved first to 4th error
but i don't know that the ways i solved are right. it has no error but not working at debugging or flashing.
when i debug the board's, led blink one time and turns off but xtimecomposer debug console is printing nothing
I think the problem that seperating flash file to two image files and downloading on the board will take too much time.
So I'm gonna move to next stage booting from link.
but customboard has not enough pin because it was made for network not using link.
so I'm considering making the pcb or connect 200 board with startkit.
and your xn files you uploaded before has same problem with me.
my error message was meaning this
first error(solved) then second error occur
solved second error then third error occur again...until 5th error
meaning I solved first to 4th error
but i don't know that the ways i solved are right. it has no error but not working at debugging or flashing.
when i debug the board's, led blink one time and turns off but xtimecomposer debug console is printing nothing
already followed that example for two startkits . similar problem