error XN11192 with xTAG3 Topic is solved

If you have a simple question and just want an answer.
danielpinheiro
Junior Member
Posts: 7
Joined: Wed Feb 24, 2016 3:37 pm

Post by danielpinheiro »

Hi there,

Thanks for the hint.
Now I get something different with the v.11.11.1:

Code: Select all

C:\Xmos>update usbtracker-608.xe

C:\Xmos>cmd /c xrun --io readserial.xe  2>serial.txt
xrun: No available devices

C:\Xmos>type serial.txt

C:\Xmos>xflash --boot-partition-size 0x40000 --data serial.txt --factory usbtracker-608.xe
xrun: No available devices
Error: F03034 Failed to fully run flash inquisitor.
Error: F03034 By default xflash will try to connect to a target in order to determine
Error: F03034 which flash device is being used even when outputting only to file.  To
Error: F03034 prevent this connection supply the --noinq option.

C:\Xmos>
I did the same steps before and now it said 'no available devices'. I tried several times, each time I disconnected all and connected again.
On the 'device manager' of Windows xTAG3 appears there.
This time, the leds of xTAG3 doesn't blink. I connect the usb cable, they light up and stay in the same state.
With the v.14 they blink when I press Enter in Command Prompt.
srinie
XCore Addict
Posts: 158
Joined: Thu Mar 20, 2014 8:04 am

Post by srinie »

Hi,
My guess would be, as the tools 11.x versions are relatively older, there is a possibility for XTAG3 device compatibility with this!?


From the below doc link, XTAG3 requires version 13.1.0 or higher of the XMOS tools:
http://media.digikey.com/pdf/PCNs/XMOS/PCN-006048.pdf

Can you pls try with XTAG2?

Cheers.
/srinie
danielpinheiro
Junior Member
Posts: 7
Joined: Wed Feb 24, 2016 3:37 pm

Post by danielpinheiro »

Hi srinie,

Thanks for that.
I didn't remember to look that.

I don't have xTAG2, and I don't know if they sell that model anymore.

I will try to ask the manufacturer to upgrade the firmware to a newer version.

When I have the problem solve I let you know.

thanks for all

D
danielpinheiro
Junior Member
Posts: 7
Joined: Wed Feb 24, 2016 3:37 pm

Post by danielpinheiro »

Finally I go it.

The manufacturer gave us the xTAG2. We tried with the v11.x and it works.

Thank you all for the help.
User avatar
infiniteimprobability
XCore Legend
Posts: 1126
Joined: Thu May 27, 2010 10:08 am
Contact:

Post by infiniteimprobability »

Thanks for letting us know!
Glad it's working.
guangshen Ji
Newbie
Posts: 1
Joined: Mon Dec 02, 2019 1:38 pm

Post by guangshen Ji »

Hello, I'm doing 8-channel audio acquisition. The development environment is xtime composer 14.3.2, and the debugger is xtag-3. But the flash memory of Driver 8 USB audio 2.0.xe failed.
txn-v0-f53fd3f8: Error: XN11192 Incomplete network configuration (no direction specified for link "4" on node "0")
Can you help me? What should I do?
Post Reply