Converting from XU208 to XUF208

Technical discussions around xCORE processors (e.g. General Purpose (L/G), xCORE-USB, xCORE-Analog, xCORE-XA).
Active Member
Posts: 35
Joined: Tue Jul 20, 2010 9:45 pm

Converting from XU208 to XUF208

Postby jmag99 » Wed Jul 31, 2019 8:38 pm

Can a design be changed from an XU part to and XUF part by simply omitting the quad spi flash part? Are there any other changes required? I am unable to find stock of the XU parts anywhere and have found that Digikey has the XUF version of the part.
User avatar
XCore Legend
Posts: 1880
Joined: Thu Jun 10, 2010 11:43 am

Postby mon2 » Wed Jul 31, 2019 8:46 pm

Yes but a 1K pull-up resistor is required on X0D01 pin (#CS of the QSPI flash) to inform the XUF device to boot from this internal flash.

Please do review the datasheet for the XUF device.

On the stock position, have you checked with Future Electronics? In the past, we have found them to be very competitive on most of the XMOS devices and they may have stock as well: ... os-3102016

From a quick search - they also have in stock the XUF208 device.

You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 8 guests