Implementing USB on Startkit

All technical discussions and projects around startKIT
Post Reply
User avatar
asid61
Active Member
Posts: 36
Joined: Sat May 31, 2014 6:39 am
Contact:

Implementing USB on Startkit

Post by asid61 »

Is there a step-by-step instruction manual or tutorial on using the USB on the Startkit to transfer data to the computer? I have seen it mentioned, but cannot find documentation on how it is supposed to be done.


User avatar
Ross
XCore Expert
Posts: 962
Joined: Thu Dec 10, 2009 9:20 pm
Location: Bristol, UK

Post by Ross »

The board wasn't really designed for this use case - the USB connector on the board is for debug only.

There are some threads on here regarding potential "hacks" but you won't find official documentation for these.

You could use the following approach, but you won't have debug:

https://www.xmos.com/download/public/Dy ... -XTAG2.pdf
User avatar
asid61
Active Member
Posts: 36
Joined: Sat May 31, 2014 6:39 am
Contact:

Post by asid61 »

Ross wrote:The board wasn't really designed for this use case - the USB connector on the board is for debug only.

There are some threads on here regarding potential "hacks" but you won't find official documentation for these.

You could use the following approach, but you won't have debug:

https://www.xmos.com/download/public/Dy ... -XTAG2.pdf
That's exactly what I was looking for! Somebody mentioned using dynamic loading in another thread, so I can take a look at that now. Thank you.
pasau
Experienced Member
Posts: 77
Joined: Fri Dec 06, 2013 7:05 pm

Post by pasau »

please post if you make it working, i have been bashing my head on this for a while :3
Post Reply