The SPI-Flash used on the xCore-200 MC Audio development board is ISSI_IS25LQ016B.
For production needs, I removed ISSI_IS25LQ016B and replaced it with GIGADEVICE_GD25Q40C.
But unable to download firmware and boot up.
I found that the status registers of GIDADEV_GD25Q40C and ISSI_IS25LQ016B are different,
such as the position of QE_Bit: IS25LQ016B is at bit6 and GD25Q40C is at bit9,
and I set the <ExternalDevices> item in the XN file to
<Attribute Name="QE_BIT" Value="flash_qe_bit_9"/> will cause compilation errors.
In addition, in order to facilitate end users to upgrade the firmware, our firmware needs to be compatible with multiple models of SPI-Flash.
So I hope to get the function source code corresponding to quadflash.h and quadflashlib.h to modify, in order to achieve our goal of one firmware compatible with multiple SPI-Flash models
Sub forums for various specialist XMOS applications. e.g. USB audio, motor control and robotics.
2 posts • Page 1 of 1
- New User
- Posts: 2
- Joined: Mon Jun 28, 2021 4:39 am
- XCore Legend
- Posts: 1903
- Joined: Thu Jun 10, 2010 11:43 am