changing input/output number in app_usb_aud_xk_216_mc
Posted: Thu May 07, 2020 8:28 am
We have purchased a XC-AUDIO-216-MC-AB evaluation board to evaluate the XMOS audio platform solution. We want to develop a 4 to 6 channels inputs and 2 channels output system for data acquisition.
1) The Windows 10 UAC2 driver functions with the version 6.12.2 of the embedded (and flashed) application but not with a compiled 6.15.2 version (from downloaded source code).
Why the version 6.15.2 of the firmware cannot be used with the Windows 10 UAC2 driver ?
2) I am trying to compile a version of the embedded application with less than 10 inputs but the capture no longer works on the PC if I change NUM_USB_CHAN_IN (I tested with 8, 6 and 4).
If I modify only I2S_CHANS_ADC, for example 4 instead of 8, I can see that the acquisition is done only on the first 4 inputs (the samples are 0 on the other 4 inputs).
I placed a break point in the decouple function (decouple.xc file, line 742, after "else if (tmp == SET_STREAM_FORMAT_IN)").
If NUM_USB_CHAN_IN = 10, I go through the break point but not with a lower even value of NUM_USB_CHAN_IN.
Is there a reason why it is not possible to decrease the number of inputs and outputs in the embedded application?
NB: I used the build configuration: 2i10o10xxxxxx
1) The Windows 10 UAC2 driver functions with the version 6.12.2 of the embedded (and flashed) application but not with a compiled 6.15.2 version (from downloaded source code).
Why the version 6.15.2 of the firmware cannot be used with the Windows 10 UAC2 driver ?
2) I am trying to compile a version of the embedded application with less than 10 inputs but the capture no longer works on the PC if I change NUM_USB_CHAN_IN (I tested with 8, 6 and 4).
If I modify only I2S_CHANS_ADC, for example 4 instead of 8, I can see that the acquisition is done only on the first 4 inputs (the samples are 0 on the other 4 inputs).
I placed a break point in the decouple function (decouple.xc file, line 742, after "else if (tmp == SET_STREAM_FORMAT_IN)").
If NUM_USB_CHAN_IN = 10, I go through the break point but not with a lower even value of NUM_USB_CHAN_IN.
Is there a reason why it is not possible to decrease the number of inputs and outputs in the embedded application?
NB: I used the build configuration: 2i10o10xxxxxx