XCore Exchange

I have already downloaded Thesycon.Why can't I use the command "dfucons"

hey,guy
What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.

Another question.I already have the following drivers: XMOS xtag-3 and XMOS Microphone Array Control why thesycon shows that I have no connection driver?

You need to run the dfucons.exe from the command prompt (dosshell).

What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.

As the message states, you have not supplied a command :)

Try:

dfucons -h <ENTER>

The is the CLI interface = Command Line Interface so you will need to pass some parameters after the dfucons

Here is what we see after installing this download:

http://www.xcore.com/viewtopic.php?t=5570&start=20

Thank you for your reply. I hope you will continue to help me.
I used the command "dfucons info",but it turns out that No devices available.
My device manager has two devices for xmos.they are xmos xtag-3 and xmos microphone array control.Why can't they be scanned?

"dfucons info" shows only devices with DFU interface. XMOS xtag-3 has not DFU interface. Be sure DFU is enabled in your "xmos microphone array control" firmware.