For the people who are interested, document updated on XMOS website about Adding DSP to the XMOS USB Audio 2.0 L1 Reference Design.
Sethu.
Information update on xmos.com
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
-
- Active Member
- Posts: 47
- Joined: Wed Feb 05, 2014 1:25 am
I expect soon we will open one of these and find there is now XC Specification and Programming Guide that match the current language state.
The XC language, the tools, and of course the multi-core microcontrollers are awesome.
Thanks for keeping us up to date!
The XC language, the tools, and of course the multi-core microcontrollers are awesome.
Thanks for keeping us up to date!
-
- Active Member
- Posts: 51
- Joined: Mon Dec 16, 2013 3:23 pm
Latest Update, there is now a new release of the CAN Bus module which can be used immediately.
This latest revision of the XMOS CAN controller offers the following functionality:
· Support CAN 2.0 specification parts A & B
· Programmable bit rate, up to 1Mbps (the maximum supported by CAN2.0)
· Support for standard (11-bit) and extended (29-bit) frame identifiers
· Support for remote frames
· Supports CRC pass through
· Fully implemented in software
The CAN bus module can be accessed either from xmos.com (see http://www.xmos.com/support/xsoftip) or from within xTIMEcomposer.
This latest revision of the XMOS CAN controller offers the following functionality:
· Support CAN 2.0 specification parts A & B
· Programmable bit rate, up to 1Mbps (the maximum supported by CAN2.0)
· Support for standard (11-bit) and extended (29-bit) frame identifiers
· Support for remote frames
· Supports CRC pass through
· Fully implemented in software
The CAN bus module can be accessed either from xmos.com (see http://www.xmos.com/support/xsoftip) or from within xTIMEcomposer.