new xcore.ai - more details?

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
darek
New User
Posts: 2
Joined: Wed Dec 16, 2009 8:52 am

Post by darek »

Hi,
Thanks! I have raised a ticked at the XMOS website that the link is broken

Regards,
Darek
CousinItt wrote: Mon Nov 02, 2020 12:01 pm Pages for XU316-1024-FB265 and XU316-1024-QF60A datasheets have appeared on the xcore.ai site, but the links are dead. Both are dated 1 Sept 2020, and the revisions are 22 and 18 respectively. I don't know if that is a good sign.


User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

leobodnar
Member
Posts: 12
Joined: Mon May 07, 2018 9:26 am

Post by leobodnar »

Tensorflow hub is on here.

There is a link to xTime Tools 15.0.0 if you are on Linux.

Leo
User avatar
CousinItt
Respected Member
Posts: 360
Joined: Wed May 31, 2017 6:55 pm

Post by CousinItt »

The tools link just takes me to a Licence Request page.

Does anyone know where this much-publicised SDK is? Can't see it on github.

https://www.xmos.ai/xmos-announces-all- ... of-things/
User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

The new devices and tools, docs, etc. are only open to early adopters at this time.

We will have to wait till the details are released to us mortals.
User avatar
TSC
Experienced Member
Posts: 111
Joined: Sun Mar 06, 2011 11:39 pm

Post by TSC »

I just noticed that datasheets for the new XU316 xmos.ai parts are actually up now for anyone to see.

https://www.xmos.ai/xcore-ai/

Also, the availability for some parts showed as "November 2021" briefly about a month ago, but now all show as "Contact XMOS".
User avatar
CousinItt
Respected Member
Posts: 360
Joined: Wed May 31, 2017 6:55 pm

Post by CousinItt »

Well spotted! They must have only just gone up.
User avatar
CousinItt
Respected Member
Posts: 360
Joined: Wed May 31, 2017 6:55 pm

Post by CousinItt »

The SDK and explorer kit information is now available.
User avatar
TSC
Experienced Member
Posts: 111
Joined: Sun Mar 06, 2011 11:39 pm

Post by TSC »

Indeed!

With the 2.0 Explorer Kit they seem to have removed the small Xtag header that used to be under the XU316 micro (I think that version only had an extremely limited release). Instead it looks like there's essentially an Xtag built into the board accessible through the DEBUG micro-USB port. Not sure how I feel about that.

My question is if we develop our own xcore.ai board, how do we program and debug it since the previous XTAG-3 would be incompatible? I'm sure I've seen some mention of an XTAG-4 for xcore.ai chips, but I've never actually seen one.
User avatar
CousinItt
Respected Member
Posts: 360
Joined: Wed May 31, 2017 6:55 pm

Post by CousinItt »

It's a good question. The hardware manual references the xSYS2 connector and says that you can use an xTAG3 with an adapter, but, as you say, the connector is missing from the board shown on the web site. I don't know which is right.

In the image check J21 bottom right. That's a TAG-connect header, but again I'm not sure if this is intended for using the on-board debugger with other boards, or if it's intended for use with an external debugger.
Post Reply