Mic Array: USB Audio Device - No Devices connected

New to XMOS and XCore? Get started here.
sisabelle
Member
Posts: 8
Joined: Tue Sep 12, 2017 6:23 pm

Post by sisabelle »

Hi Ross, Were you able to download the .xe?


SimonFirstTimeXmos
Member
Posts: 13
Joined: Fri Sep 29, 2017 8:45 am

Post by SimonFirstTimeXmos »

sisabelle wrote:Hi,
However, when I attach the mic array via USB to my Windows 10 PC, the mic array is not detected. The TUSBAudio Control Panel reports USB Audio Device No devices connected and nothing shows up in the device manager. The LEDs do toggle when I press the A button so I am fairly certain that I flashed the array correctly.
Hi Steve, I have exactly the same issue. Did you get a resolution? Thanks, Simon.
sisabelle
Member
Posts: 8
Joined: Tue Sep 12, 2017 6:23 pm

Post by sisabelle »

Update: I opened a support ticket and was told to contact the distributor.
User avatar
Ross
XCore Expert
Posts: 962
Joined: Thu Dec 10, 2009 9:20 pm
Location: Bristol, UK

Post by Ross »

The XE you sent over fails to enumerate on my Mac. What software version download are you building/running? I would expect 6.15 or 6.19 based on what is available from Xmos.com
cr9wxz
Newbie
Posts: 1
Joined: Mon Oct 16, 2017 4:16 pm

Post by cr9wxz »

Hi Steve, I have exactly the same issue. The mic array cannot connect the PC. Did you get a resolution? Thanks.
bhanuprakashbv
Member++
Posts: 21
Joined: Wed Sep 06, 2017 10:13 pm

Post by bhanuprakashbv »

Hi,

I am also facing similar problem. The Xcore microphone array is not detected - XP-USB-MIC-UF216, UK_1728_0551.
I even don't have older version working board.
I have downloaded software version 6.15, which is available on Xmos website.
Please provide solution to proceed.

Thanks,
Bhanu
bhanuprakashbv
Member++
Posts: 21
Joined: Wed Sep 06, 2017 10:13 pm

Post by bhanuprakashbv »

Hi,
Working version of .xe(1i8o2 and 2i8o2) files for "app_usb_aud_mic_array" module are shared below:
https://drive.google.com/drive/u/0/fold ... TdLbGdxbmM

Thanks,
Bhanu
User avatar
Ross
XCore Expert
Posts: 962
Joined: Thu Dec 10, 2009 9:20 pm
Location: Bristol, UK

Post by Ross »

The board requires 6.19+ firmware version.
niruyadla@gmail.com
Member
Posts: 12
Joined: Thu Oct 12, 2017 8:04 pm

Post by niruyadla@gmail.com »

Download "sw_usb_audio-[sw]_6.15.2rc1.zip" from the below link
http://www.xmos.com/support/software/uac2

And replace module_xud with the below one
https://drive.google.com/drive/folders/ ... sp=sharing

Then generate "app_usb_aud_mic_array_2i8o2.xe" firmware file with the above combination using xtimecomposer

Now you must be able to find XMOS USB 2.0 audio device on your windows PC.

Note: Makesure you have installed windows driver from the below link (TUSBAudio control panel)
http://www.xmos.com/support/usb-audio-driver-support
woodsb
Experienced Member
Posts: 79
Joined: Thu Nov 17, 2016 11:24 pm

Post by woodsb »

Hello All,

I am having this same issue on Ubuntu 14.04. Oddly enough it used to work, but I haven't tried it in a while. Just today I tried it (even used the binary that worked months ago) and my system is not seeing the xmos device.

Any help would be greatly appreciated.

cheers,
Bill
Post Reply