xCORE-200 PLL specification?

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
Post Reply
chouston00
Junior Member
Posts: 5
Joined: Thu Feb 25, 2016 11:12 pm

xCORE-200 PLL specification?

Post by chouston00 »

Is there any additional information on the PLL in the xCORE-200 beyond what's in the datasheet (we're using the XEF216)? Specifically, I'm interested in

1) cycle-to-cycle input jitter tolerance
2) minimum/maximum duty cycle of the input clock

Thanks!


User avatar
andrewxcav
Active Member
Posts: 62
Joined: Wed Feb 17, 2016 5:10 pm
Contact:

Post by andrewxcav »

Assuming that the PLL in question is the CS2100 (and I think it has to be):

Jitter plots are on page 8 of this PDF:

https://d3uzseaevmutz1.cloudfront.net/p ... OTP_F3.pdf

And It looks like the input clock needs to be between 45% and 55%
chouston00
Junior Member
Posts: 5
Joined: Thu Feb 25, 2016 11:12 pm

Post by chouston00 »

Sorry - I meant the actual PLL in the xmos device :).
User avatar
andrewxcav
Active Member
Posts: 62
Joined: Wed Feb 17, 2016 5:10 pm
Contact:

Post by andrewxcav »

I can't find anything on duty cycle, but the jitter is on page 26 (27th page of the PDF) of this data sheet:

http://www.xmos.com/download/private/XU ... .12%29.pdf

And is specified as having a maximum (pk-pk) jitter of 2% of the clock period.

What sort of oscillator are you looking to use?
Post Reply