Options of different WLAN modules working with XMOS

Technical discussions around xCORE processors (e.g. General Purpose (L/G), xCORE-USB, xCORE-Analog, xCORE-XA).
User avatar
lilltroll
XCore Expert
Posts: 955
Joined: Fri Dec 11, 2009 3:53 am
Location: Sweden, Eskilstuna

Options of different WLAN modules working with XMOS

Postby lilltroll » Tue Dec 21, 2010 11:39 am

Hi

Some of you have build HW that uses small WLAN modules. Some with integrated UDP,TCP/IP, DHCP stack.

The robot and the iPhone is one application. I would like to have a list here of different modules.

WiFly GSX 802.11b/g Serial Module - Roving Networks http://www.rovingnetworks.com/wi-fi-modules.php

Someone with higher power, and higher speed ?
Probably not the most confused programmer anymore on the XCORE forum.
User avatar
Bianco
XCore Expert
Posts: 754
Joined: Thu Dec 10, 2009 6:56 pm

Postby Bianco » Tue Dec 21, 2010 5:36 pm

I have positive experience with lantronix devices:

http://www.lantronix.com/device-network ... ers/?tab=1
User avatar
bsmithyman
Experienced Member
Posts: 126
Joined: Fri Feb 12, 2010 10:31 pm

Postby bsmithyman » Tue Dec 21, 2010 6:30 pm

Bianco wrote:I have positive experience with lantronix devices:

http://www.lantronix.com/device-network ... ers/?tab=1
I haven't used them, but my impression is that the Lantronix Matchport series can run server applications as well, and at fairly high serial data rates. I think Surveyor Robotics uses them to pass stereoscopic video.
User avatar
lilltroll
XCore Expert
Posts: 955
Joined: Fri Dec 11, 2009 3:53 am
Location: Sweden, Eskilstuna

Postby lilltroll » Wed Dec 22, 2010 10:01 pm

Hmm, I took apart my 3in1 SMC WEBT-G EU EZ Connect™ g
2.4GHz 108 Mbps Wireless Ethernet Bridge

(It can be a repeater or an access point as well)

Inside was a nice small PCB that eats 5V with 2 antenna connectors. On is a "butterfly" antenna, the other one ends up in the standard antenna connector.

I'm very tempted to place the thing inside my XDK, and just drill an extra hole for the external antenna.
Time to study the schematics!

( I also have a rectangular ~12V 8Ah Li-Po battery! )
Probably not the most confused programmer anymore on the XCORE forum.

Who is online

Users browsing this forum: No registered users and 2 guests