Link 'buffer' question

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
Post Reply
vanjast
Member++
Posts: 30
Joined: Sat Jan 16, 2010 9:57 pm

Link 'buffer' question

Post by vanjast »

A question for those who have made their own pcb's

Has anyone buffered their Link lines across different pcbs.
If not, are the Links 'stable' through connectors (say IDC) ?

I'm thinking that I should use some LVDS buffers for the links, which is an extra hassle, but If this is not necessary, I'd prefer to go without this.

Thanks
Van


User avatar
TonyD
XCore Addict
Posts: 234
Joined: Thu Dec 10, 2009 11:11 pm
Location: Newcastle, UK
Contact:

Post by TonyD »

The XK-1 boards use a standard 20-pin IDC headers to interconnect to other XK-1 boards so I wouldn't have thought it a problem unless you're planning on having your boards some distance away from each other.
vanjast
Member++
Posts: 30
Joined: Sat Jan 16, 2010 9:57 pm

Post by vanjast »

Ja.. I'm just worried about the impedance matching, even at short distances across IDC.
I haven't done this thing before, so I'm 'treading carefully'.

I'll have to settle for LVDS as I do not want to restrict myself to short distances.
User avatar
Bianco
XCore Expert
Posts: 754
Joined: Thu Dec 10, 2009 6:56 pm
Contact:

Post by Bianco »

Xlinks over LVDS has been done succesfully
User avatar
dan
Experienced Member
Posts: 102
Joined: Mon Feb 22, 2010 2:30 pm
Contact:

Post by dan »

Hi Vanjast,

you should find these new app notes useful in answering your questions.

xmos.com->Support->Documentation: Silicon

XS1-L Link Performance/Design Guidelines
XS1-G Link Performance/Design Guideline

Not sure whether you are using XS1-L or G.

Let me know if these notes answer your questions.

Cheers,

Dan
User avatar
lilltroll
XCore Expert
Posts: 956
Joined: Fri Dec 11, 2009 3:53 am
Location: Sweden, Eskilstuna

Post by lilltroll »

In the XMOS video with Dave and the thin ribbon-cable to interconnect L1's, they use a buffer for the 5pin interface.
Probably not the most confused programmer anymore on the XCORE forum.
vanjast
Member++
Posts: 30
Joined: Sat Jan 16, 2010 9:57 pm

Post by vanjast »

Just got back from a trip...
Thanks for the further replies.. I'll have a look at these
User avatar
Woody
XCore Addict
Posts: 165
Joined: Wed Feb 10, 2010 2:32 pm

Post by Woody »

I've been using unbuffered links down IDC cable lengths of 20cm or so with good data rates.

If you need integrity at the expense of link performance you can always slow the links down by using a large delay between the links (inter-symbol delay). That way you can transfer data across really quite poor links. Each symbol corresponds to a transition on one of the link wires. So long as each symbol being transmitted is received as a single symbol (i.e. a transition is not received as 3 transitions due to ringing etc) the link's integrity should be fine.
Post Reply