Are all pins of XSYS connector necessary for XTAG during pro Topic is solved

If you have a simple question and just want an answer.
Post Reply
User avatar
sethu_jangala
XCore Expert
Posts: 589
Joined: Wed Feb 29, 2012 10:03 am

Post by sethu_jangala »

No. Only the following seven pins are required, RST_N, TRST_N, TMS, TCK, TDI, TDO and GND. The XMOS-Links and UART are only required for advanced debug. Therefore, those pins are not necessary for XTAG operation on production boards.



View Solution
User avatar
sethu_jangala
XCore Expert
Posts: 589
Joined: Wed Feb 29, 2012 10:03 am

Are all pins of XSYS connector necessary for XTAG during pro

Post by sethu_jangala »

Post Reply