Page 2 of 3

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Wed Sep 20, 2017 4:20 pm
by sisabelle
Hi Ross, Were you able to download the .xe?

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Fri Sep 29, 2017 2:14 pm
by SimonFirstTimeXmos
sisabelle wrote:Hi,
However, when I attach the mic array via USB to my Windows 10 PC, the mic array is not detected. The TUSBAudio Control Panel reports USB Audio Device No devices connected and nothing shows up in the device manager. The LEDs do toggle when I press the A button so I am fairly certain that I flashed the array correctly.
Hi Steve, I have exactly the same issue. Did you get a resolution? Thanks, Simon.

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Mon Oct 02, 2017 1:53 pm
by sisabelle
Update: I opened a support ticket and was told to contact the distributor.

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Wed Oct 04, 2017 6:12 pm
by Ross
The XE you sent over fails to enumerate on my Mac. What software version download are you building/running? I would expect 6.15 or 6.19 based on what is available from Xmos.com

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Mon Oct 16, 2017 4:18 pm
by cr9wxz
Hi Steve, I have exactly the same issue. The mic array cannot connect the PC. Did you get a resolution? Thanks.

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Thu Oct 19, 2017 11:56 pm
by bhanuprakashbv
Hi,

I am also facing similar problem. The Xcore microphone array is not detected - XP-USB-MIC-UF216, UK_1728_0551.
I even don't have older version working board.
I have downloaded software version 6.15, which is available on Xmos website.
Please provide solution to proceed.

Thanks,
Bhanu

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Wed Oct 25, 2017 6:08 am
by bhanuprakashbv
Hi,
Working version of .xe(1i8o2 and 2i8o2) files for "app_usb_aud_mic_array" module are shared below:
https://drive.google.com/drive/u/0/fold ... TdLbGdxbmM

Thanks,
Bhanu

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Wed Oct 25, 2017 10:29 am
by Ross
The board requires 6.19+ firmware version.

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Wed Oct 25, 2017 8:19 pm
by niruyadla@gmail.com
Download "sw_usb_audio-[sw]_6.15.2rc1.zip" from the below link
http://www.xmos.com/support/software/uac2

And replace module_xud with the below one
https://drive.google.com/drive/folders/ ... sp=sharing

Then generate "app_usb_aud_mic_array_2i8o2.xe" firmware file with the above combination using xtimecomposer

Now you must be able to find XMOS USB 2.0 audio device on your windows PC.

Note: Makesure you have installed windows driver from the below link (TUSBAudio control panel)
http://www.xmos.com/support/usb-audio-driver-support

Re: Mic Array: USB Audio Device - No Devices connected

Posted: Wed Dec 06, 2017 12:20 am
by woodsb
Hello All,

I am having this same issue on Ubuntu 14.04. Oddly enough it used to work, but I haven't tried it in a while. Just today I tried it (even used the binary that worked months ago) and my system is not seeing the xmos device.

Any help would be greatly appreciated.

cheers,
Bill