dfu

Technical questions regarding the XTC tools and programming with XMOS.
Post Reply
qwerasdfzxcv
Member++
Posts: 20
Joined: Thu Oct 19, 2017 1:44 pm

dfu

Post by qwerasdfzxcv »

I have already downloaded Thesycon.Why can't I use the command "dfucons"


User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

qwerasdfzxcv
Member++
Posts: 20
Joined: Thu Oct 19, 2017 1:44 pm

Post by qwerasdfzxcv »

hey,guy
What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.
qwerasdfzxcv
Member++
Posts: 20
Joined: Thu Oct 19, 2017 1:44 pm

Post by qwerasdfzxcv »

Another question.I already have the following drivers: XMOS xtag-3 and XMOS Microphone Array Control why thesycon shows that I have no connection driver?
User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

You need to run the dfucons.exe from the command prompt (dosshell).
What is the reason for this?
C:\Program Files\Thesycon\TUSBAudio_Driver>dfucons.exe
Missing command. For help, use dfucons -h.
As the message states, you have not supplied a command :)

Try:
dfucons -h <ENTER>
The is the CLI interface = Command Line Interface so you will need to pass some parameters after the dfucons

Here is what we see after installing this download:

http://www.xcore.com/viewtopic.php?t=5570&start=20


Image
qwerasdfzxcv
Member++
Posts: 20
Joined: Thu Oct 19, 2017 1:44 pm

Post by qwerasdfzxcv »

Thank you for your reply. I hope you will continue to help me.
I used the command "dfucons info",but it turns out that No devices available.
My device manager has two devices for xmos.they are xmos xtag-3 and xmos microphone array control.Why can't they be scanned?
ffomich
Experienced Member
Posts: 119
Joined: Mon Sep 15, 2014 1:32 pm

Post by ffomich »

"dfucons info" shows only devices with DFU interface. XMOS xtag-3 has not DFU interface. Be sure DFU is enabled in your "xmos microphone array control" firmware.
Post Reply